Mass and isotopic concentrations of water-insoluble refractory carbon in total suspended particulates at Mt.Waliguan Observatory(China)

Mass concentration and isotopic values δ¹³C and ¹⁴C are presented for the water-insoluble refractory carbon（WIRC） component of total suspended particulates（TSP）,collected weekly during 2003,as well as from October 2005 to May 2006 at the WMO-GAW Mt.Waliguan（WLG） site.The overall average WIRC mass concentration was（1183±120）ng/m³（n = 79）,while seasonal averages were 2081 ±1707（spring）,454±205（summer）,650±411（autumn）,and 1019±703（winter） ng/m3.Seasonal variations in WIRC mass concentrations were consistent with black carbon measurements from an aethalometer,although WIRC concentrations were typically higher,especially in winter and spring.The δ¹³C PDB value（-25.3 ± 0.8）%.determined for WIRC suggests that its sources are C₃ biomass or fossil fuel combustion.No seasonal change in δ¹³C PDB was evident.The average percent Modern Carbon（pMC） for ¹⁴C in WIRC for winter and spring was（67.2 ± 7.7）%（n = 29）.Lower pMC values were associated with air masses transported from the area east of WLG,while higher pMC values were associated with air masses from the Tibetan Plateau,southwest of WLG.Elevated pMC values with abnormally high mass concentrations of TSP and WIRC were measured during a dust storm event.     

A Phosphorescent Platinum(II) Bipyridyl Supramolecular Polymer Based on Quadruple Hydrogen Bonds

A platinum(II) bipyridyl complex bearing bis‐ureidopyrimidinone (Pt‐bisUPy) has been designed and its self‐assembling behavior has been thoroughly investigated by ¹H NMR, DOSY NMR, Ubbelohde viscometry analysis, UV/Vis, and emission spectroscopies. Pt‐bisUPy underwent concentration‐dependent ring‐chain polymerization in apolar solvents. Hydrogen‐bonding interactions play an important role during the formation of the supramolecular polymers. Hydrogen‐bonded supramolecular polymers were transformed to nanoparticles in water through the miniemulsion method. These nanoparticles showed strong π–π excimeric emission. Metal‐metal‐to‐ligand charge transfer (MMLCT) from Pt–Pt interactions was not significant in the emission spectrum. The phosphorescence of the nanoparticle persisted even under aerobic conditions. The triplet state of these phosphorescent nanomaterials were long‐lived and possessed moderate emission quantum yields. Furthermore, the low toxicity of these materials promises a place for them in in vitro and in vivo bioimaging.     

Effects of ultrasound on the desulfurization performance of hot coal gas over Zn-Mn-Cu supported on semi-coke sorbent prepared by high-pressure impregnation method

Zn-Mn-Cu/SC(U) sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke(SC)as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitrate as active component precursors.The desulfurization performances of hot coal gas on the prepared sorbent at a mid-temperature of 500°C were tested in fixed-bed reactor.Morphology and pore structure of the prepared sorbent were also characterized by TEM,N2adsorption/desorption isotherms and XRD.For comparison,the sorbent of Zn-Mn-Cu/SC prepared by conventional high-pressure impregnation was also evaluated and characterized in order to study the effects of ultrasound treatment.Zn-Mn-Cu/SC(U) sorbent prepared by high-pressure impregnation under ultrasound-assisted condition showed a better desulfurization performance than Zn-Mn-Cu/SC.It could remove H2 S from 1000×10-6m3/m3 to 0.1×10-6m3/m3 at 500°C and maintained for 12.5 h with the sulfur capacity of 7.74%,in which both the breakthrough time and sulfur capacity were about 32% and 51% higher than those of Zn-Mn-Cu/SC sorbent.The introduction of ultrasound during high-pressure impregnation process greatly improved the morphology and pore structure of the sorbent.The ultrasonic treatment made particle size of active components smaller and made them more evenly disperse on semi-coke support,which provided more opportunities to contact with H2S in coal-based gases.However,there were no any difference in compositions and existing forms of active components on the Zn-Mn-Cu/SC and Zn-Mn-Cu/SC(U) sorbents.     

Synthesis of Ag@AgCl nanoboxes,and their application to electrochemical sensing of hydrogen peroxide at very low potential

Microchimica Acta - Inspired by water-soluble sacrificial template strategies, we have synthesized crystals of silver chloride (AgCl) consisting of a well-defined cubic exterior and a hollow...     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

A Hexagonal Covalent Porphyrin Framework as an Efficient Support for Gold Nanoparticles toward Catalytic Reduction of 4‐Nitrophenol

A hexagonal porphyrin‐based porous organic polymer, namely, CPF‐1, was constructed by 3+2 ketoenamine condensation of the C₂‐symmetric porphyrin diamine 5,15‐bis(4‐aminophenyl)‐10,20‐diphenylporphyrin and 1,3,5‐triformylphloroglucinol. This material exhibits permanent porosity and excellent thermal and chemical stability. CPF‐1 can be employed as a superior supporting substrate to immobilize Au nanoparticles (NPs) as a result of the strong interactions between Au NPs and the CPF support. An Au@CPF‐1 hybrid was synthesized by an interfacial solution infiltration method with NaBH₄ as reducing agent. Au NPs (5 nm) grew on CPF‐1 and were distributed without aggregation. Moreover, Au@CPF‐1 exhibits superior catalytic activity compared to many other reported Au‐based catalysts for the reduction of 4‐nitrophenol in the presence of NaBH₄. In addition, Au@CPF‐1 has excellent stability and recyclability, and it can be reused for three successive reaction cycles without loss of activity. The dense distribution of phenyl rings on the channel walls of the CPF support can reasonably be regarded as the active sites that adsorb the 4‐nitrophenol molecule through hydrogen‐bonding and C?H ??? π interactions, as was confirmed by the X‐ray structure of model compound DAPP‐Benz.     

Bimetallic Gold(I) Complexes with Ethynyl‐Helicene and Bis‐Phosphole Ligands: Understanding the Role of Aurophilic Interactions in their Chiroptical Properties

Monometallic gold(I)‐alkynyl‐helicene complexes ( 1 a , b ) and bimetallic gold(I)‐alkynyl‐helicene architectures featuring the presence ( 2 a , b ) or absence ( 3 a , b ) of aurophilic intramolecular interactions were prepared by using different types of phosphole ligands (mono‐phosphole L1 or bis‐phospholes L2 , 3 ). The influence of the Au^I d¹⁰ metal center(s) on the electronic, photophysical, and chiroptical properties of these unprecedented phosphole‐gold(I)‐alkynyl‐helicene complexes was examined. Experimental and theoretical results highlight the importance of ligand‐to‐ligand‐type charge transfers and the strong effect of the presence or absence of Au^I–Au^I interactions in 2 a , b .